Loading... ## 前言 Mini主机小巧的体积与精致的外形伸手大家的喜欢, 但是实际使用中, 一旦有稍高的负载, 自带的风扇就会响起, 很影响用户体验. 为了避免经常碰到风扇狂转带来的风噪, 一种方案是在BOIS中设置功耗墙, 给定一个较低的功率上限可以比较大程度的减少, 但是会比较严重的限制CPU的性能释放, 特别是选择的小主机中有一颗性能很强劲的CPU. 在逛B站的时候, 不经意看到了有大佬针对比较常见的MIni主机机型, 推出了散热改装套件, 包括被动散热方案和主动散热套件改装方案 * 被动散热: 更大的机体有更高的热容量, 将CPU等热源与机体直接连接, 凭借更大的机体即可完成散热 * 主动散热: 通过定制外壳, 可以支持替换更好的散热套件 主动散热方案的可玩性更高些, 而且商家定制的外壳已经适配了比较多的机型, 可以让更多爱折腾的小伙伴参与进来. ## 改装: 主动散热方案 我目前使用的NUC13厚款主机使用的CPU是13代i7-1360P, 部署的是PVE8.1虚拟机系统, 后期在上面会部署较多的应用, 因此需要比较强劲的性能释放, 特此选择了主动散热改装方案. 外壳套件: * 选择是大佬量产的定制的亚克力板外壳+改装套件, 感兴趣可以搜索淘宝卖家`CHILL工作室` * 也有其他大佬做过定制金属外壳, 但是没有一致更新适配最新小主机, 比较遗憾 !!! CPU散热: * 亚克力改装外壳使用利民AXP90-X36 风冷散热器, 由于外壳尺寸限制, 无法使用更高与更大的散热器 * 原装风扇是利民的9*9CM, 厚度1.5cm, 可以选择替换为猫扇: 9x9cm, 1.4cm厚款 硬盘散热: * 在硬盘与内存的一侧, 没有任何的风道, 被动散热效果不太理想, 受限于空间尺寸, 选择在M2硬盘(970EVO PLUS 2TB + 散热马甲)下方加了2个3010的盈讯PWM风扇, 与CPU风扇连在一起在BOIS中控制转速, 1000转左右1米外噪声基本可以忽略 改造成本 * 以上三部分全部成本在300左右 ![利民AXP90-X36](https://zoe.red/usr/uploads/2024/01/1022517824.png) ![3010的盈讯PWM风扇](https://zoe.red/usr/uploads/2024/01/214511120.png) ![改装后](https://zoe.red/usr/uploads/2024/01/2462686537.png) 改装后日常待机温度: ![待机温度](https://zoe.red/usr/uploads/2024/01/3898721557.png) 室温: 25.6度 ![室温](https://zoe.red/usr/uploads/2024/01/929938202.png) NUC拆解与定制外壳安装参考了B站一位UP的NUC8改装视频, 自己动手操作起来全程很顺利, 约2小时改装完毕!!! 链接: https://www.bilibili.com/video/BV1Ja41197uW THE END 本文作者:将夜 本文链接:https://zoe.red/2024/289.html 版权声明:本博客所有文章除特别声明外,均默认采用 CC BY-NC-SA 4.0 许可协议。 最后修改:2024 年 01 月 26 日 © 允许规范转载 赞 如果觉得我的文章对你有用,请随意赞赏